Phone: +86 13303078975

Steel bar induction quenching furnace

Steel bar induction quenching furnace

Features:

       Product name :  Application: Hardening & Quenching

Material Heated:   45#,40Cr,42CrMo,65mo

Bar Diameter Allow:                   Φ20-110mm

Pipe Diameter Allow:                Φ60-300mm

Length Allow:                                    Not limited

Product Detail

Application Video

Product Tags

 

steel barinduction quenching furnace is used to increase hardness and mechanical strength of steel in a specific area. Steel material will be heated to a temperature slightly higher than the upper critical (between 850-900ºC) and then cooled very quickly in a quenching medium such as oil, air, water etc.

quenching furnace process and instructions:

  • Material inspection: Mainly check straightness and surface cracks;
  •  Loading: Generally, the crane will lift the workpiece to the platform and our automatic turning device will turn the workpiece to the roller table for feeding.
  • Heating: After setting the heating temperature, PLC automatic control program will control the process;
  • Quenching:After setting water flow, pressure and so on, the system will run as the parameters.
  • Cool: Cool the quenched workpiece to room temperature;
  •  Inspect and store the packaging.
  • hardening and tempering furnace
  • Steel bar diameter

    Automatic Control

    Power Design

    Ø10-Ø28 mm

    IPC Control

    KGPS350KW Quenching+KGPS160KW Tempering

    Ø42-Ø48 mm(Anchor Bolt)

    PLC Control

    KGPS250KW Quenching+KGPS160KW Tempering

    Ø30-60 mm

    IPC Control

    IGBT250KW Quenching+IGBT160KW Tempering

    Ø30-Ø60 mm

    PLC Control

    KGPS250KW Quenching+KGPS160KW Tempering

    Ø35-Ø60 mm

    IPC Control

    KGPS250KW Quenching+KGPS160KW Tempering

    Ø30-Ø110 mm

    IPC Control

    KGPS400KW Quenching+KGPS400KW Tempering

    Ø80-v110 mm

    PLC Control

    KGPS600KW Quenching+KGPS160KW Tempering

     

    Pipe diameter

    Automatic control

    Power design

    Ø95,Ø114 mm

    PLC Control

    KGPS250KW Quenching+KGPS160KW Tempering

    Ø73.2,Ø88.9,139.7 mm(Drill pipe)

    IPC Control

    KGPS500KW Quenching+KGPS100KW Tempering

    Ø30-Ø60 mm

    PLC Control

    KGPS250KW Quenching+KGPS160KW Tempering

    Ø35-Ø60 mm

    IPC Control

    KGPS250KW Quenching+KGPS160KW Tempering

    Ø30-Ø110 mm

    IPC Control

    KGPS400KW Quenching+KGPS400KW Tempering

    Ø80-Ø110 mm

    PLC Control

    KGPS600KW Quenching+KGPS160KW Tempering

As our induction heater is all customized, the above parameters are only for your reference.

RELATED PRODUCTS