Aluminum billet induction heating furnace

Equipment power:1000KW-12000KW

Device Frequency : 500HZ-1200Hz

Production capacity: 40-300t/h

Workpiece size: 120mm-160mm square billet, length 3000mm-12000mm

Applicable workpieces: steel billet, square billet, square steel

Energy Conversion: Depending on the surface temperature of the steel billet, the power consumption per ton of steel is 40-60 degrees.

The aluminum induction heating furnace produced by Forever Electromechanical adopts a human-machine interface touch screen PLC fully automatic intelligent control system, which is easy to operate and has high production efficiency.. Aluminum billet induction heating furnace manufacturer direct sales, reasonable price, purchase high-quality aluminum billet induction heating equipment.

Characteristics of aluminum billet induction heating furnace system:

1. The rectifier circuit is always in a fully conductive state - achieving constant power operation.

2. Overall improvement in power factor - always greater than 0.95 during operation.

3. Adopting advanced rectification circuits - achieving national standards for 3rd, 5th, and 7th harmonics.

4. Adopting a series resonant circuit - high load voltage and low load loss.

5. The overall design principle is energy conservation and consumption reduction - saving more than 30% of electricity.

6. One power supply can provide uninterrupted power 24 hours a day, achieving uninterrupted production.

IGBT medium frequency induction power supply

Characteristics of aluminum billet induction heating furnace:

1. The frequency range is wide, and the appropriate frequency can be selected according to the specific specifications of the heated aluminum billet.

2. The induction heating equipment adopts a continuous heating method, and the load inside the steel billet heating furnace is relatively balanced, overcoming the huge change in the actual heating power of the aluminum billet induction heating furnace caused by the huge load variation of a single aluminum billet load from room temperature to 1100 ° C during the entire heating process. This ensures that the actual power of the induction heating furnace can be guaranteed to be above 85% of the rated power value during the entire continuous heating process, and the equipment can be effectively utilized.

3. When heating metal workpieces such as aluminum billets, by designing the billet heating furnace and capacitor reasonably, the actual power of the aluminum billet induction heating equipment can also reach more than 85% of the maximum power.

4. Compared to thyristor medium frequency furnaces, induction heating furnaces not only have a smaller size and easier maintenance, but can also save 15-20% electricity;

After sales service for aluminum billet induction heating furnace:

1. During the one-year warranty period, all induction heating equipment failures caused by component quality issues or production and installation process issues will be unconditionally repaired, except for uncontrollable external factors that violate operating procedures or national regulations. Only labor costs will be charged for such factors. 

2. During the one-year warranty period.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Mr. Wang

Email:tom@foreverfurnace.com

Phone/Wechat/Whatsapp:+86 13303078975