Angle steel electric heating furnace

Forever Electromechanical Equipment Manufacturing Co., Ltd. specializes in producing angle steel electric heating furnaces and medium frequency furnace heating angle steel equipment. The frequency induction heating equipment adopts PLC fully automatic intelligent control program, and the production efficiency of angle steel induction heating furnaces is high. Purchasing angle steel electric heating furnaces from Yuantuo Electromechanical is your ideal choice.

Scope of use of angle steel induction heating furnace:

1. Can be used for single-sided and double-sided bending of angle steel of various thicknesses

2. Can complete the task of angle steel single curvature of 50 degrees and double curvature of 45 degrees on the back side. Fire bending can be applied to boards with a thickness of 2 to 25mm and a width of 1150mm,

3. Large bending angle of 150 degrees, (can heat bend irregular shapes, plates and angle steel parts)

4. It can perform flattening and heating operations on angle steel.

The characteristics of the intermediate frequency furnace heating angle steel equipment are:

1. Adopting German original Siemens IGBT power modules; Adopting Fuji rectifier module; The epoxy resin casting power output transformer works continuously for 24 hours based on the principle of electromagnetic effect, which quickly induces large eddy currents inside the metal material in the alternating magnetic field, thereby heating the metal material up to an electric induction heating device. It can also penetrate non-metallic materials and quickly heat the metal material locally or completely. 2. If there are problems with the angle steel electric heating furnace, 90% of them are caused by substandard water quality. The internal circulating water system is one of the matched intermediate frequency induction heating devices specially designed by our company to improve the stability of the intermediate frequency power supply. It can greatly improve the stability of the power supply, is economical, and cost-effective. 3. The angle steel induction heating furnace heats up quickly: the fastest heating speed is less than 1 second (the speed can be adjusted and controlled) 4. Wide heating: can heat various workpieces (with detachable induction coils that can be replaced according to the shape of the workpiece) 5. Easy installation: can be used by connecting the power supply, induction coils, and inlet and outlet pipes

6. The angle steel induction heating furnace is easy to operate: it can be learned in a few minutes to start quickly: heating can be started after water and electricity are connected. 7. Medium frequency furnace heating angle steel equipment consumes less power: less heat loss, lower specific friction, energy consumption is 20% -30% less than other similar products, reducing production costs. 8. Good effect: The heating is very uniform (or the density of the induction coil can be adjusted to achieve the required temperature for each part of the workpiece), the heating is fast, the oxide layer is minimal, and there are no waste products after annealing.

9. Adjustable power: infinite adjustment output power protection: equipped with alarm indicators for overvoltage, overcurrent, overheating, water shortage, etc., and automatically controlled and protected.

10. Safety: Equipped with alarm indicators for overvoltage, overcurrent, overheating, water shortage, etc., and automatically controlled and protected. No high voltage, safe operation for workers.

The installation, operation, and cleaning of the angle steel induction heating furnace are simple, convenient, and economical.

After sales service for intermediate frequency furnace heating angle steel equipment:

1. The complete set of angle steel electric heating furnace is guaranteed for one year from the date of final acceptance signature. During the warranty period, if the internal angle steel electric heating furnace malfunctions, the seller should respond within 4 hours after receiving notification from the user. If personnel need to be sent to the factory for handling, the seller guarantees to arrive within 24 hours at the earliest and provide free service. If the malfunction of the intermediate frequency induction heating equipment is caused by the buyer's operational errors or natural disasters, it is not covered by the warranty. 2. Outside the warranty period, our company provides users with the required spare parts at a discounted price. In the event of a malfunction, the seller should respond within 4 hours of receiving notification from the user. If personnel need to be sent to the factory for handling, we guarantee to arrive within 24 hours and the cost will be borne by the buyer. 3. Long term provision of relevant technical services, free technical consultation and troubleshooting for intermediate frequency furnace heating angle steel equipment.

4. We provide relevant accessories and vulnerable parts for medium frequency induction heating equipment year-round, and carry out lifelong maintenance on the heating angle steel equipment of the medium frequency furnace on a cost basis.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:tom@foreverfurnace.com

Phone/Wechat/Whatsapp:+86 13303078975