Phone: +86 13303078975

What is the use of an medium frequency induction heating device?

How to use Medium frequency quenching heat treatment equipment? This is a problem that every user is more concerned about. If the induction heating equipment is not operated properly, the electronic components will be easily damaged. The old engineer, who has 30 years of working experience in the mechanical and electrical industry, explains the operation specification of the intermediate frequency induction heating equipment to you.

Operating procedures for IF induction heating equipment.

1. Operators shall be trained to operate the IF induction heating equipment. The operator shall be familiar with the performance and structure of the induction heating equipment, and shall abide by the safety and shift system.

2. There must be more than two persons to operate the IF induction heating equipment and designate the operation director.

3. During operation, check whether the protective barrier is in good condition and free from entering when working.

4. Before operation, check whether all parts of IF induction heating equipment are safe and reliable and whether the power supply is in good condition.

5. Prepare to start the induction heating equipment during operation, and check whether each cooling water pipe is smooth and whether the water pressure is within the specified standard.

6. Install the sensor, connect the cooling water, and heat the workpiece drain sensor. It is forbidden to transmit power without load. When replacing the workpiece, the high frequency must be stopped. If the high frequency cannot be stopped, the high-voltage switch shall be cut off immediately or the emergency switch shall be connected.

7. During the operation of IF induction heating equipment, the current and voltage shall not exceed the specified value.

8. During operation, close all the door. After the high voltage is closed, it is not allowed to move at the rear of the machine. It is forbidden to open the door.

9. In case of any abnormality in the working process of IF induction heating equipment, the high-voltage shall be cut off first, and then the fault shall be eliminated.



Overseas manager: Tom Wang

Phone: 0086-13303078975(whatsapp, wechat,line)

Specialist of  bar heat treatment furnace in China; Glad to be your business partner in induction heating field.

Post time: 10-11-2019