+86 133 0307 8975

tom@foreverfurnace.com

Forklift induction hardening line **customer on-site commissioning completed**

Nov. 19, 2026

Recently, the dedicated forklift induction hardening machine components has successfully finished on-site installation, commissioning and process acceptance at the customer’s factory and been officially delivered for production. Developed for core load-bearing parts such as forklift forks, hinge pins and steering knuckles, this line adopts selective local induction hardening. It precisely hardens the stress-bearing zones of workpieces, addressing common industry challenges of conventional heat treatment including large deformation, uneven hardness and uncontrollable hardened depth. It provides a stable, automated surface heat treatment solution for forklift component manufacturers.

Forklift induction hardening line **customer on-site commissioning completed**

Targeted Induction Hardening Balances Surface Hardness and Core Toughness

Forklift forks and pins endure alternating loads, impacts and abrasion during operation, imposing strict heat treatment requirements. Equipped with IGBT medium-frequency power supply, custom inductors and positioning fixtures, the line accurately targets designated hardening zones for selective heating. Supported by a closed-loop infrared temperature control system, heating power, scanning speed and quenching flow are adjusted synchronously in real time for uniform and controllable hardened depth. Only the surface layer is rapidly heated and quenched while the core retains good toughness. This effectively prevents fracture under heavy loads, improves wear resistance and extends the service life of forklift spare parts.

steel plate induction heating furnace

Forklift induction hardening line **customer on-site commissioning completed**

Automated Station Design for Mass Production of Multi-spec Forklift Parts

Controlled by centralized PLC, the integrated line realizes automatic feeding, precision positioning, scanning induction heating, spray quenching and unloading. Multiple process recipes can be pre-stored for different models of forks and pins, enabling one-click changeover. Fixtures and inductors are interchangeable for flexible production of various workpieces. Compared with standalone manual hardening equipment, automatic continuous operation minimizes human error and greatly improves batch consistency. All process data is automatically recorded for quality traceability to meet the quality control standards of construction machinery components.

Low Deformation and Minimal Oxidation to Cut Downstream Processing Costs

Conventional furnace hardening often causes bending of forklift forks and heavy workload for subsequent straightening and grinding. Induction heating concentrates heat only on the surface layer with a small heat-affected zone, so thermal deformation is well controlled and rework rates drop significantly. Fast heating reduces surface oxidation and decarburization, lowering grinding allowance. The quenchant system adopts circulating filtration for continuous purification and reuse, reducing waste liquid discharge and keeping a clean workshop environment in line with green heat treatment standards.

Full On-site Delivery and Technical Training for Stable Production

Our engineering team completed on-site assembly, wiring, no-load testing, trial hardening and parameter optimization. Hardness, hardened layer and dimensional inspection were carried out during acceptance, and all indicators met the customer’s technical specifications. Hands-on training was provided for operators and technicians on equipment operation, routine maintenance and troubleshooting. Complete English operation manuals and electrical drawings were handed over. Warranty service, remote technical support and spare parts supply are available to eliminate the customer’s worries in later production.

Forklift induction hardening line **customer on-site commissioning completed**

Expanding Heat Treatment Applications for Forklift Parts to Strengthen Supporting Supply Chains

As the forklift and warehousing equipment industry grows, OEMs set higher standards for reliability and fatigue life of load-bearing components. Local induction hardening has become the preferred process for critical parts like forks and pins. This successful commissioning marks another practical application of medium frequency induction heat treatment line in material handling machinery. The R&D team will keep optimizing fixture structures and temperature control algorithms, developing more custom induction hardening solutions for forklift components, and supplying efficient and reliable complete induction heat treatment systems for forklift part manufacturers worldwide.

Overseas manager:Mr. Wang

Email:tom@foreverfurnace.com

Phone/Wechat/Whatsapp:+8613303078975


Contact Us

Tel.:+86 133 0307 8975

E-mail: tom@foreverfurnace.com

WhatsApp: +86 133 0307 8975

Add.: Wuqiao Economic Development Zone, Hebei Province, China, Cangzhou, Hebei, China

FOLLOW US

Copyright © Hebei Yuantuo Electromechanical Equipment Manufacturing Co., Ltd. All Rights Reserved | Sitemap