induction heating furnace, induction quenching equipment, quenching and tempering equipment are the induction heating equipment that we need to pay attention to in the process of using. Of course, we need to learn what should be paid attention to in the use of induction heating furnace and quenching and tempering equipment. In this way, we can make our operation more safe and reliable, more feasible. Yuantuo electromechanical induction heating equipment factory editor to share the relevant content with you.
Far extension induction heating furnace, forging diathermy equipment, quenching and tempering furnace, induction quenching equipment are all series resonance, that is, voltage resonance frequency tracking. Therefore, the efficiency is higher and the power factor is higher. Therefore, there is an obvious power saving effect, heating 350 degrees per ton of bar material. The energy saving effect is quite obvious, and the power matching can be carried out according to the actual needs of users, and the production efficiency is quite high.
The matters needing attention in the use of induction heating furnace and quenching and tempering equipment should be paid attention to:
1. The cooling water system of induction heating equipment should be equipped with water divider and water tank to ensure the normal water supply and return water of the equipment.
2, the inlet and outlet of the water separator need to be equipped with valves, pressure gauges and so on. The number and caliber of the outlet pipe of the water divider are determined by the inlet and outlet of the induction heating equipment and the inductor, the output transformer, etc. The water divider should be equipped with a drain pipe to regulate the water pressure.
3. The diameter of the outlet pipe of the return water tank of the induction heating equipment should be larger in order to ensure that the return water is dredged. 4. The effluent of quenching and tempering furnace, induction heating furnace and induction quenching equipment should be directly observed, and Tongming plexiglass shield can be used for dust prevention.
4. it is best not to use a unified cooling tank for the power supply and coil cooling of induction heating equipment. The power supply requirements are relatively high, and the internal infarction of the power supply will seriously affect the life of the power supply.
5. When replacing different work-pieces, induction heating equipment should be reprogrammed or transferred out of existing programs in order to induce the normal operation of quenching equipment.
Overseas manager: Tom Wang
Email:tom@foreverfurnace.com
Phone: 0086-13303078975(whatsapp, wechat,line)
Specialist of bar heat treatment furnace in China; Glad to be your business partner in induction heating field.
Post time: 09-03-2019