Steel bar induction quenching furnace

Features:

Product name : Application: Hardening & Quenching

Material Heated: 45#,40Cr,42CrMo,65mo

Bar Diameter Allow: Φ20-110mm

Pipe Diameter Allow: Φ60-300mm

Length Allow: Not limited

Inquiry Email Skype

Product Detail

Application Video

Product Tags

steel bar induction quenching furnace is used to increase hardness and mechanical strength of steel in a specific area. Steel material will be heated to a temperature slightly higher than the upper critical (between 850-900ºC) and then cooled very quickly in a quenching medium such as oil, air, water etc.

quenching furnace process and instructions:

Material inspection: Mainly check straightness and surface cracks;
Loading: Generally, the crane will lift the workpiece to the platform and our automatic turning device will turn the workpiece to the roller table for feeding.
Heating: After setting the heating temperature, PLC automatic control program will control the process;
Quenching:After setting water flow, pressure and so on, the system will run as the parameters.
Cool: Cool the quenched workpiece to room temperature;
Inspect and store the packaging.

Steel bar diameter	Automatic Control	Power Design
Ø10-Ø28 mm	IPC Control	KGPS350KW Quenching+KGPS160KW Tempering
Ø42-Ø48 mm(Anchor Bolt)	PLC Control	KGPS250KW Quenching+KGPS160KW Tempering
Ø30-60 mm	IPC Control	IGBT250KW Quenching+IGBT160KW Tempering
Ø30-Ø60 mm	PLC Control	KGPS250KW Quenching+KGPS160KW Tempering
Ø35-Ø60 mm	IPC Control	KGPS250KW Quenching+KGPS160KW Tempering
Ø30-Ø110 mm	IPC Control	KGPS400KW Quenching+KGPS400KW Tempering
Ø80-v110 mm	PLC Control	KGPS600KW Quenching+KGPS160KW Tempering

Pipe diameter	Automatic control	Power design
Ø95，Ø114 mm	PLC Control	KGPS250KW Quenching+KGPS160KW Tempering
Ø73.2,Ø88.9,139.7 mm(Drill pipe)	IPC Control	KGPS500KW Quenching+KGPS100KW Tempering
Ø30-Ø60 mm	PLC Control	KGPS250KW Quenching+KGPS160KW Tempering
Ø35-Ø60 mm	IPC Control	KGPS250KW Quenching+KGPS160KW Tempering
Ø30-Ø110 mm	IPC Control	KGPS400KW Quenching+KGPS400KW Tempering
Ø80-Ø110 mm	PLC Control	KGPS600KW Quenching+KGPS160KW Tempering